BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM261

  • Size10x21"
  • PCD5x120
  • OffsetET38
  • Centre borePFS mm

This page covers the BBS LM261, one wheel from the LM family, often seen on European performance cars. It is a 21-inch wheel, 10 inches wide.

On the BBS LM261, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

At ET38 the BBS LM261 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 21-inch BBS LM261, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No fitment figure is recorded for the BBS LM261. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM261 came from and how it is built is on the BBS LM page.

Specifications

BBS LM261 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2615x120211038PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models