
BBS LM series
BBS LM262
- Size8x19"
- PCD5x120
- OffsetET45
- Centre borePFS mm
This page covers the BBS LM262, one wheel from the LM, a two-piece mesh design with a deep polished lip. It measures 8x19 inches.
On the BBS LM262, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.
ET45 is a high offset for the BBS LM262, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 19-inch BBS LM262, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The fitment of the BBS LM262 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM262 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM262 | 5x120 | 19 | 8 | 45 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit