
BBS LM series
BBS LM263
- Size7.5x18"
- PCD5x100
- OffsetET45
BBS LM263 is a part number from the LM, a two-piece mesh design with a deep polished lip. It is an 18-inch wheel, 7.5 inches wide.
On the BBS LM263, the 5x100 PCD is the one used by VW Group, Subaru and Toyota.
ET45 is a high offset for the BBS LM263, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.
Before fitting an 18-inch BBS LM263, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore and fitment of the BBS LM263 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM263, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM263 | 5x100 | 18 | 7.5 | 45 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit