BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM264

  • Size8.5x18"
  • PCD5x100
  • OffsetET45

This page covers the BBS LM264, one wheel from the LM, a two-piece mesh design with a deep polished lip. Size is 8.5J x 18.

On the BBS LM264, the 5x100 PCD is the one used by VW Group, Subaru and Toyota.

ET45 is a high offset for the BBS LM264, so it tucks well inside the arch, as front-drive and most modern cars need. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting an 18-inch BBS LM264, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS LM264 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM264 came from and how it is built is on the BBS LM page.

Specifications

BBS LM264 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2645x100188.545—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models