
BBS LM series
BBS LM270
- Size9x19"
- PCD5x114.3
- OffsetET18
- Centre borePFS mm
BBS LM270 is a part number from the LM range of two-piece mesh wheels. It is a 19-inch wheel, 9 inches wide.
On the BBS LM270, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.
The BBS LM270 uses ET18, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 19 inches, the BBS LM270 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The fitment of the BBS LM270 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM270 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM270 | 5x114.3 | 19 | 9 | 18 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit