BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM271

  • Size10x19"
  • PCD5x114.3
  • OffsetET22
  • Centre borePFS mm

This page covers the BBS LM271, one wheel from the LM range of two-piece mesh wheels. It measures 10x19 inches.

On the BBS LM271, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.

An offset of ET22 puts the BBS LM271 in the usual range for European saloons of its era. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 19-inch BBS LM271, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS LM271 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM271 came from and how it is built is on the BBS LM page.

Specifications

BBS LM271 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2715x114.3191022PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models