
BBS LM series
BBS LM272
- Size10x19"
- PCD5x120
- OffsetET25
- Centre borePFS mm
BBS LM272 is a part number from the LM family, often seen on European performance cars. It measures 10x19 inches.
On the BBS LM272, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.
An offset of ET25 puts the BBS LM272 in the usual range for European saloons of its era. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
Before fitting a 19-inch BBS LM272, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The fitment of the BBS LM272 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM272 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM272 | 5x120 | 19 | 10 | 25 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit