BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM273

  • Size8.5x20"
  • PCD5x112
  • OffsetET38
  • Centre borePFS mm

BBS LM273 is a part number from the LM family, often seen on European performance cars. Size is 8.5J x 20.

On the BBS LM273, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the PFS mm centre bore decides whether you need hub-centric rings.

ET38 is a high offset for the BBS LM273, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

At 20 inches, the BBS LM273 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The fitment of the BBS LM273 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM273 came from and how it is built is on the BBS LM page.

Specifications

BBS LM273 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2735x112208.538PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models