BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM274

  • Size7.5x17"
  • PCD5x112
  • OffsetET48
  • Centre bore66.5 mm

BBS LM274 is a part number from the LM range of two-piece mesh wheels. It measures 7.5x17 inches.

The 5x112 bolt pattern of the BBS LM274 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

ET48 is a high offset for the BBS LM274, so it tucks well inside the arch, as front-drive and most modern cars need. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

At 17 inches, the BBS LM274 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The fitment of the BBS LM274 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM274 came from and how it is built is on the BBS LM page.

Specifications

BBS LM274 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2745x112177.54866.5————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models