BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM275

  • Size7.5x18"
  • PCD5x112
  • OffsetET48
  • Centre bore66.5 mm

BBS LM275 is a part number from the LM family, often seen on European performance cars. It measures 7.5x18 inches.

On the BBS LM275, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

ET48 is a high offset for the BBS LM275, so it tucks well inside the arch, as front-drive and most modern cars need. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

Before fitting an 18-inch BBS LM275, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS LM275 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS LM275, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM275 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2755x112187.54866.5————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models