
BBS LM series
BBS LM403
- Size9x19"
- PCD5x120
- OffsetET27
- Centre borePFS mm
BBS LM403 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 9x19 inches.
The 5x120 bolt pattern of the BBS LM403 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.
The BBS LM403 uses ET27, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
At 19 inches, the BBS LM403 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No fitment figure is recorded for the BBS LM403. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM403 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM403 | 5x120 | 19 | 9 | 27 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit