BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM404

  • Size10x19"
  • PCD5x120
  • OffsetET37
  • Centre borePFS mm

BBS LM404 is a part number from the LM range of two-piece mesh wheels. It measures 10x19 inches.

The 5x120 bolt pattern of the BBS LM404 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

ET37 is a high offset for the BBS LM404, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 19-inch BBS LM404, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No fitment figure is recorded for the BBS LM404. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM404 came from and how it is built is on the BBS LM page.

Specifications

BBS LM404 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM4045x120191037PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models