BBS RS 001 wheel

BBS RS series

BBS RS 001

  • Size7x15"
  • PCD4x100
  • OffsetET25
  • Centre bore57 mm
  • Lip1 1/8"
  • Barrel5 3/8"

BBS RS 001 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 7J x 15 and is listed for BMW 3/1, 3/R; VW golf 2.

On the BBS RS 001, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

An offset of ET25 puts the BBS RS 001 in the usual range for European saloons of its era. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 15-inch BBS RS 001, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS 001 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS 001 came from and how it is built is on the BBS RS page.

Specifications

BBS RS 001 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0014x10015725571 1/8"5 3/8"BMW 3/1, 3/R; VW golf 2—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models