
BBS RS series
BBS RS008
- Size7x16"
- PCD5x112
- OffsetET24
- Centre bore66.5 mm
- Lip1"
- Barrel5.5"
This page covers the BBS RS008, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 7 inches wide and is listed for MB 116, 123, 124, 126, 201.
On the BBS RS008, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET24 puts the BBS RS008 in the usual range for European saloons of its era. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 16 inches, the BBS RS008 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS008: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS008, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS008 | 5x112 | 16 | 7 | 24 | 66.5 | 1" | 5.5" | MB 116, 123, 124, 126, 201 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit