
BBS RS series
BBS RS007
- Size210 (8.26)x415 (16.3)"
- PCD5x120
- OffsetET15
- Centre bore72.5 mm
- Lip50
- Barrel150
BBS RS007 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 210 (8.26)J x 415 (16.3) and is listed for BMW M 635Csi.
On the BBS RS007, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
The BBS RS007 uses ET15, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s.
Before fitting a 415 (16.3)-inch BBS RS007, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS007: lip 50, barrel 150. You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 16" center, TRX.
More on where the BBS RS007 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS007 | 5x120 | 415 (16.3) | 210 (8.26) | 15 | 72.5 | 50 | 150 | BMW M 635Csi | 16" center, TRX |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit