BBS RS006 wheel

BBS RS series

BBS RS006

  • Size8x16"
  • PCD5x120
  • OffsetET24
  • Centre bore72.5 mm
  • Lip1.5"
  • Barrel6"

The BBS RS006 belongs to the classic three-piece RS family. It measures 8x16 inches and is listed for BMW 5/1, 5/H, 6Cs/1, 7, 7/1.

The 5x120 bolt pattern of the BBS RS006 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

An offset of ET24 puts the BBS RS006 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 16 inches, the BBS RS006 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS006: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS006 and its siblings, their construction and buying tips.

Specifications

BBS RS006 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0065x1201682472.51.5"6"BMW 5/1, 5/H, 6Cs/1, 7, 7/1—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models