BBS RS005 wheel

BBS RS series

BBS RS005

  • Size7x16"
  • PCD5x120
  • OffsetET11
  • Centre bore72.5 mm
  • Lip1.5"
  • Barrel5"

This page covers the BBS RS005, one wheel from the classic three-piece RS family. Size is 7J x 16 and is listed for BMW 5/1, 5/H, 6Cs/1, 7, 7/1.

The 5x120 bolt pattern of the BBS RS005 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET11 on the BBS RS005, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 16-inch BBS RS005, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS005 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS005, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS005 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0055x1201671172.51.5"5"BMW 5/1, 5/H, 6Cs/1, 7, 7/1—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models