
BBS RS series
BBS RS012
- Size7x16"
- PCD5x130
- OffsetET23
- Centre bore71.6 mm
- Lip1"
- Barrel5.5"
BBS RS012 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 7x16 inches and is listed for Porsche 911, 930, 944 bis 8/86.
On the BBS RS012, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
An offset of ET23 puts the BBS RS012 in the usual range for European saloons of its era. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
At 16 inches, the BBS RS012 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS012 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS012, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS012 | 5x130 | 16 | 7 | 23 | 71.6 | 1" | 5.5" | Porsche 911, 930, 944 bis 8/86 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit