
BBS RS series
BBS RS013
- Size8x16"
- PCD5x130
- OffsetET11
- Centre bore71.6 mm
- Lip2"
- Barrel5.5"
BBS RS013 is a part number from the classic three-piece RS family. It measures 8x16 inches and is listed for Porsche 911, 930, 944 bis 8/86.
The 5x130 bolt pattern of the BBS RS013 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
The BBS RS013 has a low ET11 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 16 inches, the BBS RS013 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS013: lip 2", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS013, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS013 | 5x130 | 16 | 8 | 11 | 71.6 | 2" | 5.5" | Porsche 911, 930, 944 bis 8/86 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit