
BBS RS series
BBS RS014
- Size9x16"
- PCD5x130
- OffsetET11
- Centre bore71.6 mm
- Lip2.5"
- Barrel6"
BBS RS014 is a part number from the classic three-piece RS family. Size is 9J x 16 and is listed for Porsche 911, 930, 944 bis 8/86.
On the BBS RS014, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
With ET11 on the BBS RS014, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting a 16-inch BBS RS014, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS014: lip 2.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS014 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS014 | 5x130 | 16 | 9 | 11 | 71.6 | 2.5" | 6" | Porsche 911, 930, 944 bis 8/86 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit