
BBS RS series
BBS RS015
- Size8x16"
- PCD5x120.65
- OffsetET11
- Centre bore73.9 mm
- Lip2"
- Barrel5.5"
This page covers the BBS RS015, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 8 inches wide and is listed for Aston Martin Lagonda.
The 5x120.65 bolt pattern of the BBS RS015 is the one used by Chevrolet Corvette and Camaro; the 73.9 mm centre bore decides whether you need hub-centric rings.
The BBS RS015 has a low ET11 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting a 16-inch BBS RS015, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS015 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS015 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS015 | 5x120.65 | 16 | 8 | 11 | 73.9 | 2" | 5.5" | Aston Martin Lagonda | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit