
BBS RS series
BBS RS017
- Size8x16"
- PCD5x130
- OffsetET62
- Centre bore71.6 mm
- Lip0.5"
- Barrel7"
This page covers the BBS RS017, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 8x16 inches and is listed for Porsche 928 VA bis bj 8/85.
The 5x130 bolt pattern of the BBS RS017 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
At ET62 the BBS RS017 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 16-inch BBS RS017, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS017 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS017 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS017 | 5x130 | 16 | 8 | 62 | 71.6 | 0.5" | 7" | Porsche 928 VA bis bj 8/85 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit