BBS RS018 wheel

BBS RS series

BBS RS018

  • Size9x16"
  • PCD5x130
  • OffsetET36
  • Centre bore71.6 mm
  • Lip1.5"
  • Barrel7"

BBS RS018 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 16-inch wheel, 9 inches wide and is listed for Porsche 928 HA.

The 5x130 bolt pattern of the BBS RS018 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

At ET36 the BBS RS018 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting a 16-inch BBS RS018, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS018: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS018, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS018 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0185x1301693671.61.5"7"Porsche 928 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models