
BBS RS series
BBS RS020
- Size7.5x16"
- PCD5x120.65
- OffsetET30
- Centre bore73.9 mm
- Lip1"
- Barrel6"
BBS RS020 is a part number from the classic three-piece RS family. It measures 7.5x16 inches and is listed for Jaguar XJ, XJS, XJ40.
The 5x120.65 bolt pattern of the BBS RS020 is the one used by Chevrolet Corvette and Camaro; the 73.9 mm centre bore decides whether you need hub-centric rings.
The BBS RS020 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
At 16 inches, the BBS RS020 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS020 multi-piece build: lip 1", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS020, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS020 | 5x120.65 | 16 | 7.5 | 30 | 73.9 | 1" | 6" | Jaguar XJ, XJS, XJ40 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit