
BBS RS series
BBS RS021
- Size8x16"
- PCD5x120
- OffsetET11
- Centre bore72.5 mm
- Lip2"
- Barrel5.5"
The BBS RS021 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 8 inches wide and is listed for BMW 5/1, 5/H, 6Cs/1, 7, 7/1.
On the BBS RS021, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
The BBS RS021 has a low ET11 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 16 inches, the BBS RS021 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS021 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS021 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS021 | 5x120 | 16 | 8 | 11 | 72.5 | 2" | 5.5" | BMW 5/1, 5/H, 6Cs/1, 7, 7/1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit