
BBS RS series
BBS RS022
- Size9x16"
- PCD5x120
- OffsetET24
- Centre bore72.5 mm
- Lip2"
- Barrel6.5"
The BBS RS022 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 9 inches wide and is listed for BMW 5/1, 5/H, 6Cs/1, 7, 7/1, M3.
The 5x120 bolt pattern of the BBS RS022 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
The BBS RS022 uses ET24, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting a 16-inch BBS RS022, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS022: lip 2", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS022 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS022 | 5x120 | 16 | 9 | 24 | 72.5 | 2" | 6.5" | BMW 5/1, 5/H, 6Cs/1, 7, 7/1, M3 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit