
BBS RS series
BBS RS023
- Size8x16"
- PCD5x112
- OffsetET24
- Centre bore66.5 mm
- Lip1.5"
- Barrel6"
This page covers the BBS RS023, one wheel from the classic three-piece RS family. It is a 16-inch wheel, 8 inches wide and is listed for MB 116, 123, 126, 201 HA.
The 5x112 bolt pattern of the BBS RS023 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET24 puts the BBS RS023 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 16 inches, the BBS RS023 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS023 multi-piece build: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS023 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS023 | 5x112 | 16 | 8 | 24 | 66.5 | 1.5" | 6" | MB 116, 123, 126, 201 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit