
BBS RS series
BBS RS024
- Size9x16"
- PCD5x112
- OffsetET21
- Centre bore66.5 mm
- Lip2"
- Barrel6,5"
The BBS RS024 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 9J x 16 and is listed for MB 126 HA.
The 5x112 bolt pattern of the BBS RS024 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET21 puts the BBS RS024 in the usual range for European saloons of its era. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting a 16-inch BBS RS024, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS024 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 6,5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS024, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS024 | 5x112 | 16 | 9 | 21 | 66.5 | 2" | 6,5" | MB 126 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit