
BBS RS series
BBS RS047
- Size7x15"
- PCD4x100
- OffsetET38
- Centre bore57 mm
- Lip5/8"
- Barrel5 7/8"
The BBS RS047 belongs to the classic three-piece RS family. It measures 7x15 inches and is listed for BMW 3/A, VW golf 2.
On the BBS RS047, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
ET38 is a high offset for the BBS RS047, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 15 inches, the BBS RS047 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS047 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5/8", barrel 5 7/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS047, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS047 | 4x100 | 15 | 7 | 38 | 57 | 5/8" | 5 7/8" | BMW 3/A, VW golf 2 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit