
BBS RS series
BBS RS055
- Size9x16"
- PCD5x130
- OffsetET15
- Centre bore71.6 mm
- Lip2.5"
- Barrel6"
This page covers the BBS RS055, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 9J x 16 and is listed for Porsche 911, 930, 944.
The 5x130 bolt pattern of the BBS RS055 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
An offset of ET15 puts the BBS RS055 in the usual range for European saloons of its era. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
Before fitting a 16-inch BBS RS055, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS055 multi-piece build: lip 2.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS055, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS055 | 5x130 | 16 | 9 | 15 | 71.6 | 2.5" | 6" | Porsche 911, 930, 944 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit