BBS RS057 wheel

BBS RS series

BBS RS057

  • Size10x16"
  • PCD5x130
  • OffsetET23
  • Centre bore71.6 mm
  • Lip2.5"
  • Barrel7"

BBS RS057 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 10x16 inches and is listed for Porsche 911, 930, 944.

On the BBS RS057, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

The BBS RS057 uses ET23, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

At 16 inches, the BBS RS057 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS057 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS057 came from and how it is built is on the BBS RS page.

Specifications

BBS RS057 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0575x13016102371.62.5"7"Porsche 911, 930, 944—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models