
BBS RS series
BBS RS065
- Size8x15"
- PCD5x112
- OffsetET24
- Centre bore57 mm
- Lip1.5"
- Barrel6"
The BBS RS065 belongs to the classic three-piece RS family. It is a 15-inch wheel, 8 inches wide and is listed for Audi 100 Q, 200 Q, Quattro.
The 5x112 bolt pattern of the BBS RS065 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.
An offset of ET24 puts the BBS RS065 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 15-inch BBS RS065, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS065 multi-piece build: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS065 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS065 | 5x112 | 15 | 8 | 24 | 57 | 1.5" | 6" | Audi 100 Q, 200 Q, Quattro | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit