
BBS RS series
BBS RS066
- Size10x16"
- PCD5x120
- OffsetET20
- Centre bore72.5 mm
- Lip2.5"
- Barrel7"
The BBS RS066 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 10x16 inches and is listed for BMW 7, 7/1 HA.
The 5x120 bolt pattern of the BBS RS066 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
The BBS RS066 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 16 inches, the BBS RS066 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS066: lip 2.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS066, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS066 | 5x120 | 16 | 10 | 20 | 72.5 | 2.5" | 7" | BMW 7, 7/1 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit