BBS RS070 wheel

BBS RS series

BBS RS070

  • Size7x15"
  • PCD4x100
  • OffsetET16
  • Centre bore57 mm
  • Lip1.5"
  • Barrel5.5"

BBS RS070 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 7J x 15 and is listed for BMW 3/1, 3/R.

On the BBS RS070, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

An offset of ET16 puts the BBS RS070 in the usual range for European saloons of its era. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

At 15 inches, the BBS RS070 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS070 multi-piece build: lip 1.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS070 came from and how it is built is on the BBS RS page.

Specifications

BBS RS070 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0704x10015716571.5"5.5"BMW 3/1, 3/R—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models