
BBS RS series
BBS RS071
- Size8x15"
- PCD4x100
- OffsetET18
- Centre bore57 mm
- Lip2"
- Barrel5.5"
The BBS RS071 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 8J x 15 and is listed for BMW 3/1, 3/R HA.
The 4x100 bolt pattern of the BBS RS071 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
An offset of ET18 puts the BBS RS071 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 15 inches, the BBS RS071 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS071: lip 2", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS071 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS071 | 4x100 | 15 | 8 | 18 | 57 | 2" | 5.5" | BMW 3/1, 3/R HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit