
BBS RS series
BBS RS074
- Size9x16"
- PCD4x100
- Centre bore57 mm
- Lip3 1/8"
- Barrel5 3/8"
This page covers the BBS RS074, one wheel from the classic three-piece RS family. It measures 9x16 inches and is listed for BMW 3/1.
On the BBS RS074, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 16 inches, the BBS RS074 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS074 is a multi-piece wheel, so the lip and barrel are separate parts: lip 3 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 15" center.
The offset of the BBS RS074 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RS overview covers the background of the BBS RS074 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS074 | 4x100 | 16 | 9 | — | 57 | 3 1/8" | 5 3/8" | BMW 3/1 | 15" center |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit