BBS RS075 wheel

BBS RS series

BBS RS075

  • Size9x16"
  • PCD5x120
  • OffsetET8
  • Centre bore72.5 mm
  • Lip2.5"
  • Barrel6"

The BBS RS075 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 9 inches wide and is listed for BMW 6, 6Cs/1, 7, 7/1.

On the BBS RS075, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET8 on the BBS RS075, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 16 inches, the BBS RS075 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS075 multi-piece build: lip 2.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS075 and its siblings, their construction and buying tips.

Specifications

BBS RS075 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0755x120169872.52.5"6"BMW 6, 6Cs/1, 7, 7/1—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models