BBS RS076 wheel

BBS RS series

BBS RS076

  • Size10x16"
  • PCD5x120
  • OffsetET11
  • Centre bore72.5 mm
  • Lip3"
  • Barrel6.5"

The BBS RS076 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 10x16 inches and is listed for BMW 6Cs/1, 7.

On the BBS RS076, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET11 on the BBS RS076, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

At 16 inches, the BBS RS076 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS076: lip 3", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS076, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS076 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS0765x12016101172.53"6.5"BMW 6Cs/1, 7—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models