
BBS RS series
BBS RS077
- Size8x16"
- PCD5x112
- OffsetET35
- Centre bore66.5 mm
- Lip1.5"
- Barrel6"
This page covers the BBS RS077, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 8x16 inches and is listed for MB 124, 201.
On the BBS RS077, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
ET35 is a high offset for the BBS RS077, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting a 16-inch BBS RS077, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS077: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS077, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS077 | 5x112 | 16 | 8 | 35 | 66.5 | 1.5" | 6" | MB 124, 201 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit