
BBS RS series
BBS RS080
- Size9x15"
- PCD5x130
- OffsetET28
- Centre bore71.6 mm
- Lip2"
- Barrel6.5"
The BBS RS080 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 9J x 15 and is listed for Porsche 911, 930, 944.
On the BBS RS080, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
An offset of ET28 puts the BBS RS080 in the usual range for European saloons of its era. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 15 inches, the BBS RS080 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS080: lip 2", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS080 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS080 | 5x130 | 15 | 9 | 28 | 71.6 | 2" | 6.5" | Porsche 911, 930, 944 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit