
BBS RS series
BBS RS081
- Size11x15"
- PCD5x130
- OffsetET28
- Centre bore71.6 mm
- Lip3"
- Barrel7.5"
The BBS RS081 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 11x15 inches and is listed for Porsche 911, 930, 944.
The 5x130 bolt pattern of the BBS RS081 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
An offset of ET28 puts the BBS RS081 in the usual range for European saloons of its era. An 11-inch rim normally takes tyres from about 275 to 325 mm wide.
Before fitting a 15-inch BBS RS081, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS081 multi-piece build: lip 3", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS081 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS081 | 5x130 | 15 | 11 | 28 | 71.6 | 3" | 7.5" | Porsche 911, 930, 944 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit