BBS RS126 wheel

BBS RS series

BBS RS126

  • Size14x15"
  • PCD5x130
  • OffsetET-54
  • Centre bore71.6 mm
  • Lip7.5"
  • Barrel6"

BBS RS126 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 14 inches wide and is listed for Porsche 911, 930.

The 5x130 bolt pattern of the BBS RS126 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

The BBS RS126 has a low ET-54 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 14-inch rim normally takes tyres from about 355 to 405 mm wide.

Before fitting a 15-inch BBS RS126, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS126 is a multi-piece wheel, so the lip and barrel are separate parts: lip 7.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS126 and its siblings, their construction and buying tips.

Specifications

BBS RS126 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1265x1301514-5471.67.5"6"Porsche 911, 930—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models