BBS RS127 wheel

BBS RS series

BBS RS127

  • Size9x15"
  • PCD4x100
  • OffsetET-36
  • Centre bore57 mm
  • Lip4.5"
  • Barrel4"

This page covers the BBS RS127, one wheel from the classic three-piece RS family. It measures 9x15 inches and is listed for BMW 3, 3/1.

The 4x100 bolt pattern of the BBS RS127 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

With ET-36 on the BBS RS127, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 15 inches, the BBS RS127 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS127: lip 4.5", barrel 4". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS127, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS127 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1274x100159-36574.5"4"BMW 3, 3/1—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models