BBS RS128 wheel

BBS RS series

BBS RS128

  • Size11x15"
  • PCD4x100
  • OffsetET-61
  • Centre bore57 mm
  • Lip6.5"
  • Barrel4"

This page covers the BBS RS128, one wheel from the classic three-piece RS family. It is a 15-inch wheel, 11 inches wide and is listed for BMW 3, 3/1.

On the BBS RS128, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

The BBS RS128 has a low ET-61 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. An 11-inch rim normally takes tyres from about 275 to 325 mm wide.

Before fitting a 15-inch BBS RS128, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS128 is a multi-piece wheel, so the lip and barrel are separate parts: lip 6.5", barrel 4". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS128 and its siblings, their construction and buying tips.

Specifications

BBS RS128 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1284x1001511-61576.5"4"BMW 3, 3/1—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models