
BBS RS series
BBS RS129
- Size13x15"
- PCD4x100
- OffsetET-74
- Centre bore57 mm
- Lip8"
- Barrel4.5"
The BBS RS129 belongs to the classic three-piece RS family. Size is 13J x 15 and is listed for BMW 3, 3/1.
On the BBS RS129, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
The BBS RS129 has a low ET-74 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 335-375 mm are the usual match for a 13-inch rim.
At 15 inches, the BBS RS129 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS129 is a multi-piece wheel, so the lip and barrel are separate parts: lip 8", barrel 4.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS129 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS129 | 4x100 | 15 | 13 | -74 | 57 | 8" | 4.5" | BMW 3, 3/1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit