
BBS RS series
BBS RS130
- Size10.5x15"
- PCD5x130
- OffsetET-22
- Centre bore71.6 mm
- Lip4.5"
- Barrel5.5"
This page covers the BBS RS130, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 10.5x15 inches and is listed for Porsche 911, 930, 944.
The 5x130 bolt pattern of the BBS RS130 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
The BBS RS130 has a low ET-22 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 10.5-inch rim normally takes tyres from about 265 to 315 mm wide.
Before fitting a 15-inch BBS RS130, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS130 is a multi-piece wheel, so the lip and barrel are separate parts: lip 4.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS130 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS130 | 5x130 | 15 | 10.5 | -22 | 71.6 | 4.5" | 5.5" | Porsche 911, 930, 944 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit