BBS RS131 wheel

BBS RS series

BBS RS131

  • Size8.5x16"
  • PCD5x130
  • OffsetET56
  • Centre bore71.6 mm
  • Lip0.5"
  • Barrel7.5"

BBS RS131 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 8.5 inches wide and is listed for Porsche 928s VA.

On the BBS RS131, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

ET56 is a high offset for the BBS RS131, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

Before fitting a 16-inch BBS RS131, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS131: lip 0.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS131 and its siblings, their construction and buying tips.

Specifications

BBS RS131 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1315x130168.55671.60.5"7.5"Porsche 928s VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models