
BBS RS series
BBS RS138
- Size7x15"
- PCD4x100
- OffsetET16
- Centre bore56.5 mm
- Lip1.5"
- Barrel5.5"
BBS RS138 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 7 inches wide and is listed for Opel Kadett E.
The 4x100 bolt pattern of the BBS RS138 is the one used by older BMW, VW, Honda and Mazda; the 56.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET16 puts the BBS RS138 in the usual range for European saloons of its era. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
At 15 inches, the BBS RS138 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS138: lip 1.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS138 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS138 | 4x100 | 15 | 7 | 16 | 56.5 | 1.5" | 5.5" | Opel Kadett E | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit