
BBS RS series
BBS RS139
- Size9x15"
- PCD4x100
- OffsetET3
- Centre bore56.5 mm
- Lip3"
- Barrel5.5"
BBS RS139 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 15-inch wheel, 9 inches wide and is listed for Opel Kadett E.
The 4x100 bolt pattern of the BBS RS139 is the one used by older BMW, VW, Honda and Mazda; the 56.5 mm centre bore decides whether you need hub-centric rings.
The BBS RS139 has a low ET3 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 15 inches, the BBS RS139 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS139: lip 3", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS139 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS139 | 4x100 | 15 | 9 | 3 | 56.5 | 3" | 5.5" | Opel Kadett E | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit