
BBS RS series
BBS RS140
- Size8x15"
- PCD4x100
- OffsetET28
- Centre bore57 mm
- Lip1.5"
- Barrel6"
This page covers the BBS RS140, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 15 and is listed for Opel Manta B.
On the BBS RS140, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
An offset of ET28 puts the BBS RS140 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 15-inch BBS RS140, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS140: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS140, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS140 | 4x100 | 15 | 8 | 28 | 57 | 1.5" | 6" | Opel Manta B | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit